|
| Bio-Chelat - safe effective elimination of heavy metals |
|
|
|
Heavy Metals Test - Mercury kit ("HMTS(Hg)")
How to Test
Contents of HMTS(Hg) kit
- 1 Colour strip on box of the kit
- 1 Large test tube
- 1 vial with clear cap - reagent 1
- 1 vial with blue cap - reagent 2
- 1 vial with reddish brown substance - reagent 3
Storage of Heavy Metals Test - Mercury Kit
The Mercury Test kit should be stored in a cool place - 12C to 20C.
Preparation of Test Solutions
- Remove the the 3 small plastic ampoules from the large test tube
- In the empty large test-tube, add 6 ml. of the solution to be tested
- Add the colourless liquid from the blue cap vial (reagent 2) to the solution to be tested in the large test tube ("combined solutions").
Turn the test large test tube gently up and down a few times (at least 3) to make sure that the 2 liquids are well mixed together
- Add the colourless liquid from the clear cap vial (reagent 1) to the reddish brown substance in the red cap vial (reagent 3).
Close the cap of the red cap vial and shake until the reddish-brown substance has been mostly dissolved ("mixed solution"). This might
take a little while
- The solutions are now ready for testing
Conducting the test
- Pour the "mixed solutions" (reagents 1 and 3) in the vial with the reddish brown substance into the large test-tube
containing the "combined solutions" (reagent 2 and solution to be tested)
- Allow combined solutions in the large test-tube to settle for 6 minutes - no shaking is required but you may have to tilt the
test tube or "roll" it gently a few times to make sure the solutions are mixed well to obtain a true and accurate colour change
- Compare the colour of the combined solutions in the large test-tube to the colour strip provided. In case of
comparison difficulties, try holding the test-tube against the colour strip just above liquid level of large test-tube. Move
along the colour strip until colour of solution matches with that of the colour strip
- The number on the colour strip indicates the concentration of mercury ions present in the solution in ppm
- If the concentration of the mercury ions is higher than 2 ppm the solution will change into a strong pink colour after a period of time
- If the concentration is extremely low or no mercury ions are present, the colour of the solution will clear and become almost
colourless after a period of time. However, when saliva is tested and there are strong digestive enzymes present, these digestive enzymes may affect the
final colour. Instead of becoming colourless, the solution may turn into a different colour (such as green)
Test Interference:
The test results can be affected by the presence of ions from gold, silver, palladium, rhodium, platinum,
iridium, ruthenium ("noble metals") as well as tin.
Colour strip
The numbers indicate concentration in ppm
Osumex Bio-Chelat is most effective in eliminating heavy metals contamination in the body
Sample of a Mercury HMT kit
Warning
Please keep the Mercury Test kit in a safe place out of reach of children.
After the test has been completed, the tested solution should be disposed of
safely. The best disposal method is to flush the solution in the toilet.
There should not be any contact of the contents of the Mercury Test kit with food.
Please wash your hands thoroughly after use.
Samples/Images of test results sent in by users
The above information is provided for general
educational purposes only. It is not intended to replace competent
health care advice received from a knowledgeable healthcare professional.
You are urged to seek healthcare advice for the treatment of any
illness or disease.
Health Canada and the FDA (USA) have not evaluated these
statements. This product is not intended to diagnose, treat, cure, or prevent
any disease.
|
|
Contents of a Mercury HMT kit. Please see below for a sample of the kit.
|
